SURVEYS
Whether you need a survey of existing facilities for Asset assessment purposes or you are planning a refurbishment of your property, we can undertake a survey to your specific requirements.
These can be carried out on Commercial/Retail/Industrial/Domestic properties.
Measured Survey :: Drone Survey :: Laser Survey
LEVEL 1 - Envelope check
- Confirmation of existing building plan layout
- Production of drawings (and block plan if required)
LEVEL 2 - Basic non intrusive
- Confirmation of existing building plan layout
- Furniture layout
- Reflected ceiling layout
- Raised access floor layout
LEVEL 3 - Basic non intrusive + M&E
This is the same as Level 2, but Mechanical & Electrical services in Risers are also surveyed
LEVEL 4 - Detailed Intrusive survey
- Confirmation of existing building plan layout
- Furniture layout
- All M&E serviced are surveyed and traced and labelled with existing assets references
It's recommended that this level of survey is done 'Out of hours' to reduce effect on working environment
- CAD data from the survey can be produced in either 2D or 3D, whatever suits your purpose.
- Through working partnerships with our clients, we are also to conduct detailed M&E Surveys
Some images of properties that we have measure surveyed
Drone Surveys
Through a partnership with one of our clients we have the opportunity to enable you to see your property or space as you've never seen it before.
Drone surveys are the best way to see those areas that are high or in-accessible. We can then use this data to create CAD drawings or models.
All drones are flown by CAA accredited operators.
Laser scanning
Through a partnership with one of our clients we have the opportunity to measure your property/site with Millimetre accuracy, and give your designers or builders the best possible start by using accurate existing data.
Laser scanning works by sending out millions beams of light which register distances from the datum point to the surface. This data is thenn processed with the data from other datums to produce a Pointcloud.
We then use that Pointcloud data to produce drawings or models depending on your requirements
